Aluminum Wiring Services In CITY, STATE.
We offer safe replacement of your aluminum wiring system
Do you Have Aluminum Wiring In Your CONTRACTOR CITY Home?
If your home was built through the mid 1960’s or into the 1970’s then it’s likely you have aluminum wiring inside of your walls unless someone has replaced it. If you’ve just purchased an older home or you’ve been living in the home for quite a while and haven’t had your aluminum wiring inspected by a professional then now would be a good time to start!
COMPANY NAME is a full service electrical contractor serving the CONTRACTOR CITY area. We specialize in inspecting, troubleshooting, and repairing, homes and buildings that have older aluminum wiring in-place. From simple troubleshooting and repair to replacing entire circuits with more modern copper wiring the team at COMPANY NAME can help make your aluminum wiring safe and reliable.
Aluminum Wiring Services We Provide
- Aluminum wiring inspections
- Aluminum wiring repairs
- Aluminum wiring replacement
Is Your Aluminum Wiring Dangerous?
When it comes to the electrical system in your home or building usually safety and reliability are the top concerns. Aluminum wiring is a safe wiring choice but only if it’s been properly installed. One of the issues with aluminum wiring is that it can oxidize when it’s exposed to the air. This can result in overheating and often leads to a failure at the termination point such as a receptacle or switch, especially if aluminum wiring has been used in branch circuits (the smaller circuits from your electrical panel to plugs, switches, and light fixtures).
If you’ve just moved into an older home or you’ve noticed some strange electrical symptoms in an older home you’ve lived in for a while it would be a wise idea to call a licensed electrician such as COMPANY NAME to come and inspect the aluminum wiring in your home. When it comes to electrical you’re better safe than sorry!
How Do You Know If Your Home Has Aluminum Wiring?
If it was built during the 1960’s or the 1970’s then your home was built during a time period when Aluminum wiring was a common material used in construction. There is a very good chance your home has aluminum wiring in one or several circuits. You can find out for sure by looking at any visible wiring. In an older home you might find visible wiring in your basement, attic, or around your electrical panel. Aluminum wiring is usually marked with the word “Aluminum” or with a number of abbreviations such as Alum, Alum ACM, or just AL.
If you are unsure or don’t feel comfortable poking around the electrical system of your home just give us a call and we’re happy to come and have a look for you.
Common Electrical Issues Caused By Aluminum Wiring
There are a variety of symptoms that might be present if your home has aluminum wiring that has started to oxidize or has become otherwise unreliable and unsafe.
- Lights that flicker and cannot be repaired with a new bulb.
- Electrical outlets that won’t work even with the circuit powered on.
- Annoying static from your TV or computers.
- Circuit breakers that constantly trip for no apparent reason.
- Burning plastic odor around switches and outlets.
If your older home has any of the above symptoms it’s important to have the issue inspected by a professional as soon as you can.
Why Choose COMPANY NAME for Your Aluminum Wiring?
When you choose to work with COMPANY NAME to inspect or repair your Aluminum wiring you’re partnering with a small, local, company that has extensive experience in the electrical trades. We are licensed by the STATE OR PROVINCE and insured to work on the electrical systems inside your home or building.
As an owner/operated company you can have the peace-of-mind knowing that any electrical work we complete will meet or exceed local electrical safety codes. The work we do will be safe and reliable and we also back all of our work with a 1 year warranty on our workmanship.
If you’d like to receive an estimate to solve your aluminum wiring problems give us a call at 555-555-5555 or fill out our online contact form and someone will be getting right back to you.
Questions About Aluminum Wiring?
What is aluminum wiring?
Aluminum wiring was commonly used in residential homes from the mid-1960s to the early 1970s as a cheaper substitute for copper due to high copper prices. It is a type of electrical wiring made from aluminum, typically identified by its silver color.
Is aluminum wiring safe?
While aluminum wiring itself is not dangerous, problems can arise at connections (such as at outlets, switches, and circuit breakers) where aluminum wire is in contact with other metals, leading to corrosion, overheating, and potentially fires. These risks can be mitigated with proper maintenance, regular inspection, and the use of specific connectors designed for aluminum wiring.
How can I tell if my home has aluminum wiring?
If your house was built or had major work done between the mid-1960s and early 1970s, it might have aluminum wiring. You can check by looking at the exposed wiring in your basement, attic, or garage, or by having a professional electrician inspect your home.
What are the signs of problems with aluminum wiring?
Potential signs of problems include flickering lights, warm switch or outlet cover plates, discolored outlets or switches, a smell of burning plastic, or unusual static on radios, TVs, or computers. If you notice any of these signs, it's important to contact a professional electrician immediately.
Should I replace aluminum wiring in my house?
Replacing aluminum wiring with copper wiring can be costly and disruptive, as it often involves opening walls. As an alternative, electricians can perform a process called "pig-tailing," where they attach a short piece of copper wire to the aluminum wire with a special connector. This copper wire is then connected to outlets and switches, reducing the risk of overheating. It's essential to consult with a professional electrician to discuss the best option for your home.
What is the lifespan of aluminum wiring?
While aluminum wiring itself does not necessarily have a shorter lifespan than copper wiring, the potential issues at connections (like corrosion or loosening) tend to occur as the wiring system ages. Regular inspections by a professional electrician can help ensure the safety and longevity of the system.
What are CO/ALR devices?
CO/ALR (Copper/Aluminum Revised) devices, such as outlets and switches, are specifically designed for use with aluminum wiring. These devices have been tested for safety with aluminum wiring and are marked "CO/ALR." They have larger contact areas and are made from materials designed to prevent corrosion.